History Of Computing

The history of computing is longer than the history of computing hardware and modern computing technology and includes the history of methods intended for pen and paper or for chalk and slate, with or without the aid of tables.

Concrete devices

Digital computing is intimately tied to the representation of numbers. But long before abstractions like ''the number'' arose, there were mathematical concepts to serve the purposes of civilization. These concepts are implicit in concrete practices such as:
*''One-to-one correspondence'', a rule to count ''how many'' items, e.g. on a tally stick, eventually abstracted into ''numbers''.
*''Comparison to a standard'', a method for assuming ''reproducibility'' in a measurement, for example, the number of coins.
*The ''3-4-5'' right triangle was a device for assuring a ''right angle'', using ropes with 12 evenly spaced knots, for example.

Numbers

Eventually, the concept of numbers became concrete and familiar enough for counting to arise, at times with sing-song mnemonics to teach sequences to others. All known human languages, except the Piraha language, have words for at least "one" and "two", and even some animals like the blackbird can distinguish a surprising number of items.

Advances in the numeral system and mathematical notation eventually led to the discovery of mathematical operations such as addition, subtraction, multiplication, division, squaring, square root, and so forth. Eventually the operations were formalized, and concepts about the operations became understood well enough to be stated formally, and even proven. See, for example, Euclid's algorithm for finding the greatest common divisor of two numbers.

By the High Middle Ages, the positional Hindu–Arabic numeral system had reached Europe, which allowed for systematic computation of numbers. During this period, the representation of a calculation on paper actually allowed calculation of mathematical expressions, and the tabulation of mathematical functions such as the square root and the common logarithm (for use in multiplication and division) and the trigonometric functions. By the time of Isaac Newton's research, paper or vellum was an important computing resource, and even in our present time, researchers like Enrico Fermi would cover random scraps of paper with calculation, to satisfy their curiosity about an equation. Even into the period of programmable calculators, Richard Feynman would unhesitatingly compute any steps which overflowed the memory of the calculators, by hand, just to learn the answer; by 1976 Feynman had purchased an HP-25 calculator with a 49 program-step capacity; if a differential equation required more than 49 steps to solve, he could just continue his computation by hand.

Early computation

Mathematical statements need not be abstract only; when a statement can be illustrated with actual numbers, the numbers can be communicated and a community can arise. This allows the repeatable, verifiable statements which are the hallmark of mathematics and science. These kinds of statements have existed for thousands of years, and across multiple civilizations, as shown below:

The earliest known tool for use in computation is the Sumerian abacus, and it was thought to have been invented in Babylon c. 2700–2300 BC. Its original style of usage was by lines drawn in sand with pebbles. Abaci, of a more modern design, are still used as calculation tools today. This was the first known calculator and most advanced system of calculation known to date - preceding Archimedes by 2,000 years.

In c. 1050–771 BC, the south-pointing chariot was invented in ancient China. It was the first known geared mechanism to use a differential gear, which was later used in analog computers. The Chinese also invented a more sophisticated abacus from around the 2nd century BC known as the Chinese abacus.

In the 5th century BC in ancient India, the grammarian Pāṇini formulated the grammar of Sanskrit in 3959 rules known as the Ashtadhyayi which was highly systematized and technical. Panini used metarules, transformations and recursions.

In the 3rd century BC, Archimedes used the mechanical principle of balance (see Archimedes Palimpsest#Mathematical content) to calculate mathematical problems, such as the number of grains of sand in the universe (''The sand reckoner''), which also required a recursive notation for numbers (e.g., the myriad myriad).

The Antikythera mechanism is believed to be the earliest known mechanical analog computer. It was designed to calculate astronomical positions. It was discovered in 1901 in the Antikythera wreck off the Greek island of Antikythera, between Kythera and Crete, and has been dated to ''circa'' 100 BC.

Mechanical analog computer devices appeared again a thousand years later in the medieval Islamic world and were developed by Muslim astronomers, such as the mechanical geared astrolabe by Abū Rayhān al-Bīrūnī, and the torquetum by Jabir ibn Aflah. According to Simon Singh, Muslim mathematicians also made important advances in cryptography, such as the development of cryptanalysis and frequency analysis by Alkindus. Programmable machines were also invented by Muslim engineers, such as the automatic flute player by the Banū Mūsā brothers,. and Al-Jazari's humanoid robots and ''castle clock'', which is considered to be the first programmable analog computer.

During the Middle Ages, several European philosophers made attempts to produce analog computer devices. Influenced by the Arabs and Scholasticism, Majorcan philosopher Ramon Llull (1232–1315) devoted a great part of his life to defining and designing several ''logical machines'' that, by combining simple and undeniable philosophical truths, could produce all possible knowledge. These machines were never actually built, as they were more of a thought experiment to produce new knowledge in systematic ways; although they could make simple logical operations, they still needed a human being for the interpretation of results. Moreover, they lacked a versatile architecture, each machine serving only very concrete purposes. In spite of this, Llull's work had a strong influence on Gottfried Leibniz (early 18th century), who developed his ideas further, and built several calculating tools using them.

Indeed, when John Napier discovered logarithms for computational purposes in the early 17th century, there followed a period of considerable progress by inventors and scientists in making calculating tools. The apex of this early era of formal computing can be seen in the difference engine and its successor the analytical engine both by Charles Babbage. Babbage never completed constructing either engine, but in 2002 Doron Swade and a group of other engineers at the Science Museum in London completed Babbage's difference engine using only materials that would have been available in the 1840s. By following Babbage's detailed design they were able to build a functioning engine, allowing historians to say, with some confidence, that if Babbage would have been able to complete his difference engine it would have worked. The additionally advanced analytical engine combined concepts from his previous work and that of others to create a device that, if constructed as designed, would have possessed many properties of a modern electronic computer, such as an internal "scratch memory" equivalent to RAM, multiple forms of output including a bell, a graph-plotter, and simple printer, and a programmable input-output "hard" memory of punch cards which it could modify as well as read. The key advancement which Babbage's devices possessed beyond those created before his was that each component of the device was independent of the rest of the machine, much like the components of a modern electronic computer. This was a fundamental shift in thought; previous computational devices served only a single purpose, but had to be at best disassembled and reconfigured to solve a new problem. Babbage's devices could be reprogramed to solve new problems by the entry of new data, and act upon previous calculations within the same series of instructions. Ada Lovelace took this concept one step further, by creating a program for the analytical engine to calculate Bernoulli numbers, a complex calculation requiring a recursive algorithm. This is considered to be the first example of a true computer program, a series of instructions that act upon data not known in full until the program is run.

Following Babbage, although unaware of his earlier work, Percy Ludgate in 1909 published the 2nd of the only two designs for mechanical analytical engines in history. Two other inventors, Leonardo Torres y Quevedo and Vannevar Bush, also did follow on research based on Babbage's work. In his ''Essays on Automatics'' (1913) Torres y Quevedo designed a Babbage type of calculating machine that used electromechanical parts which included floating point number representations and built a prototype in 1920. Bush's paper ''Instrumental Analysis'' (1936) discussed using existing IBM punch card machines to implement Babbage's design. In the same year he started the Rapid Arithmetical Machine project to investigate the problems of constructing an electronic digital computer.

Several examples of analog computation survived into recent times. A planimeter is a device which does integrals, using distance as the analog quantity. Until the 1980s, HVAC systems used air both as the analog quantity and the controlling element. Unlike modern digital computers, analog computers are not very flexible, and need to be reconfigured (i.e., reprogrammed) manually to switch them from working on one problem to another. Analog computers had an advantage over early digital computers in that they could be used to solve complex problems using behavioral analogues while the earliest attempts at digital computers were quite limited.

Since computers were rare in this era, the solutions were often ''hard-coded'' into paper forms such as nomograms, which could then produce analog solutions to these problems, such as the distribution of pressures and temperatures in a heating system.

Digital electronic computers

None of the early computational devices were really computers in the modern sense, and it took considerable advancement in mathematics and theory before the first modern computers could be designed.

In an 1886 letter, Charles Sanders Peirce described how logical operations could be carried out by electrical switching circuits.Peirce, C. S., "Letter, Peirce to A. Marquand", dated 1886, '' Writings of Charles S. Peirce'', v. 5, 1993, pp. 421–423. See During 1880-81 he showed that NOR gates alone (or alternatively NAND gates alone) can be used to reproduce the functions of all the other logic gates, but this work on it was unpublished until 1933. The first published proof was by Henry M. Sheffer in 1913, so the NAND logical operation is sometimes called Sheffer stroke; the logical NOR is sometimes called ''Peirce's arrow''. Consequently, these gates are sometimes called ''universal logic gates''.

Eventually, vacuum tubes replaced relays for logic operations. Lee De Forest's modification, in 1907, of the Fleming valve can be used as a logic gate. Ludwig Wittgenstein introduced a version of the 16-row truth table as proposition 5.101 of ''Tractatus Logico-Philosophicus'' (1921). Walther Bothe, inventor of the coincidence circuit, got part of the 1954 Nobel Prize in physics, for the first modern electronic AND gate in 1924. Konrad Zuse designed and built electromechanical logic gates for his computer Z1 (from 1935 to 1938).

The first recorded idea of using digital electronics for computing was the 1931 paper "The Use of Thyratrons for High Speed Automatic Counting of Physical Phenomena" by C. E. Wynn-Williams. From 1934 to 1936, NEC engineer Akira Nakashima, Claude Shannon, and Victor Shestakov published papers introducing switching circuit theory, using digital electronics for Boolean algebraic operations. (3+207+1 pages
10:00 min
/ref>

In 1935 Alan Turing wrote his seminal paper On Computable Numbers, with an Application to the Entscheidungsproblem in which he modeled computation in terms of a one-dimensional storage tape, leading to the idea of the Universal Turing machine and Turing-complete systems.

The first digital electronic computer was developed in the period April 1936 - June 1939, in the IBM Patent Department, Endicott, New York by Arthur Halsey Dickinson.Dickinson, A.H., "Accounting Apparatus", , filed Jan. 20, 1940, granted Jan. 1, 1952 In this computer IBM introduced for the first time, a calculating device with keyboard, processor and electronic output (display). Competitor to IBM was the digital electronic computer NCR3566, developed in NCR, Dayton, Ohio by Joseph Desch and Robert Mumma in the period April 1939 - August 1939.Desch, J.R., "Calculating Machine", , filed March 20, 1940, granted Apr. 29, 1952 The IBM and NCR machines were decimal, executing addition and subtraction in binary position code.

In December 1939 John Atanasoff and Clifford Berry completed their experimental model to prove the concept of the Atanasoff–Berry computer.Larson E., "Findings of Fact, Conclusions of Law and Order for Judgement", US District Court, District of Minnesota, Fourth Division, 19 Oct. 1973, ushistory.org/more/eniac/index.htm, ushistory.org/more/eniac/intro.htm This experimental model is binary, executed addition and subtraction in octal binary code and is the first binary digital electronic computing device. The Atanasoff–Berry computer was intended to solve systems of linear equations, though it was not programmable and it was never completed. The Z3 computer, built by German inventor Konrad Zuse in 1941, was the first programmable, fully automatic computing machine, but it was not electronic.

During World War II, ballistics computing was done by women, who were hired as "computers." The term computer remained one that referred to mostly women (now seen as "operator") until 1945, after which it took on the modern definition of machinery it presently holds.

The ENIAC (Electronic Numerical Integrator And Computer) was the first electronic general-purpose computer, announced to the public in 1946. It was Turing-complete, digital, and capable of being reprogrammed to solve a full range of computing problems. Women implemented the programming for machines like the ENIAC, and men created the hardware.

The Manchester Baby was the first electronic stored-program computer. It was built at the Victoria University of Manchester by Frederic C. Williams, Tom Kilburn and Geoff Tootill, and ran its first program on 21 June 1948.

William Shockley, John Bardeen and Walter Brattain at Bell Labs invented the first working transistor, the point-contact transistor, in 1947, followed by the bipolar junction transistor in 1948. At the University of Manchester in 1953, a team under the leadership of Tom Kilburn designed and built the first transistorized computer, called the Transistor Computer, a machine using the newly developed transistors instead of valves. The first stored-program transistor computer was the ETL Mark III, developed by Japan's Electrotechnical Laboratory from 1954 to 1956. However, early junction transistors were relatively bulky devices that were difficult to manufacture on a mass-production basis, which limited them to a number of specialised applications.

In 1954, 95% of computers in service were being used for engineering and scientific purposes.

Personal computers

The MOSFET, metal–oxide–silicon field-effect transistor (MOSFET), also known as the MOS transistor, was invented by Mohamed Atalla and Dawon Kahng at Bell Labs in 1959. It was the first truly compact transistor that could be MOSFET scaling, miniaturised and Moore's law, mass-produced for a wide range of uses. The MOSFET made it possible to build very large-scale integration, high-density integrated circuit chips. The MOSFET is the most widely used transistor in computers, and is the fundamental building block of digital electronics.

The silicon-gate MOS integrated circuit was developed by Federico Faggin at Fairchild Semiconductor in 1968. This led to the development of the first single-chip microprocessor, the Intel 4004. The Intel 4004 was developed as a single-chip microprocessor from 1969 to 1970, led by Intel's Federico Faggin, Marcian Hoff, and Stanley Mazor, and Busicom's Masatoshi Shima. The chip was mainly designed and realized by Faggin, with his silicon-gate MOS technology. The microprocessor led to the microcomputer revolution, with the development of the microcomputer, which would later be called the personal computer (PC).

Most early microprocessors, such as the Intel 8008 and Intel 8080, were 8-bit. Texas Instruments released the first fully 16-bit microprocessor, the Texas Instruments TMS9900, TMS9900 processor, in June 1976. They used the microprocessor in the TI-99/4 and TI-99/4A computers.

The 1980s brought about significant advances with microprocessor that greatly impacted the fields of engineering and other sciences. The Motorola 68000 microprocessor had a processing speed that was far superior to the other microprocessors being used at the time. Because of this, having a newer, faster microprocessor allowed for the newer microcomputers that came along after to be more efficient in the amount of computing they were able to do. This was evident in the 1983 release of the Apple Lisa. The Lisa was one of the first personal computers with a Graphical user interface, graphical user interface (GUI) that was sold commercially. It ran on the Motorola 68000 CPU and used both dual floppy disk drives and a 5 MB hard drive for storage. The machine also had 1MB of Random-access memory, RAM used for running software from disk without rereading the disk persistently. After the failure of the Lisa in terms of sales, Apple released its first Macintosh computer, still running on the Motorola 68000 microprocessor, but with only 128KB of RAM, one floppy drive, and no hard drive in order to lower the price.

In the late 1980s and early 1990s, we see more advancements with computers becoming more useful for actual computational purposes. In 1989, Apple released the Macintosh Portable, it weighed and was extremely expensive, costing US$7,300. At launch it was one of the most powerful laptops available, but due to the price and weight, it was not met with great success, and was discontinued only two years later. That same year Intel introduced the Touchstone Delta supercomputer, which had 512 microprocessors. This technological advancement was very significant, as it was used as a model for some of the fastest multi-processor systems in the world. It was even used as a prototype for Caltech researchers, who used the model for projects like real time processing of satellite images and simulating molecular models for various fields of research.

Supercomputers

In terms of supercomputing, the first widely acknowledged supercomputer was the Control Data Corporation (CDC) CDC 6600, 6600 built in 1964 by Seymour Cray. Its maximum speed was 40 MHz or 3 million floating point operations per second (FLOPS). The CDC 6600 was replaced by the CDC 7600 in 1969; although its normal clock speed was not faster than the 6600, the 7600 was still faster due to its peak clock speed, which was approximately 30 times faster than that of the 6600. Although CDC was a leader in supercomputers, their relationship with Seymour Cray (which had already been deteriorating) completely collapsed. in 1972, Cray left CDC and began his own company, Cray Research, Cray Research Inc. With support from investors in Wall Street, an industry fueled by the Cold War, and without the restrictions he had within CDC, he created the Cray-1 supercomputer. With a clock speed of 80 MHz or 136 megaFLOPS, Cray developed a name for himself in the computing world. By 1982, Cray Research produced the Cray X-MP equipped with multiprocessing and in 1985 released the Cray-2, which continued with the trend of multiprocessing and clocked at 1.9 gigaFLOPS. Cray Research developed the Cray Y-MP in 1988, however afterwards struggled to continue to produce supercomputers. This was largely due to the fact that the Cold War had ended, and the demand for cutting edge computing by colleges and the government declined drastically and the demand for micro processing units increased.

Today, supercomputers are still used by the governments of the world and educational institutions for computations such as simulations of natural disasters, genetic variant searches within a population relating to disease, and more. , the fastest supercomputer is Fugaku (supercomputer), Fugaku.

Navigation and astronomy

Starting with known special cases, the calculation of logarithms and trigonometric functions can be performed by looking up numbers in a mathematical table, and interpolation, interpolating between known cases. For small enough differences, this linear operation was accurate enough for use in navigation and astronomy in the Age of Exploration. The uses of interpolation have thrived in the past 500 years: by the twentieth century Leslie Comrie and W.J. Eckert systematized the use of interpolation in tables of numbers for punch card calculation.

Weather prediction

The numerical solution of differential equations, notably the Navier-Stokes equations was an important stimulus to computing,
with Lewis Fry Richardson's numerical approach to solving differential equations. The first computerised weather forecast was performed in 1950 by a team composed of American meteorologists Jule Charney, Philip Thompson, Larry Gates, and Norwegian meteorologist Ragnar Fjørtoft, applied mathematician John von Neumann, and ENIAC programmer Klara Dan von Neumann. To this day, some of the most powerful computer systems on Earth are used for weather forecasts.

Symbolic computations

By the late 1960s, computer systems could perform computer algebra, symbolic algebraic manipulations well enough to pass college-level calculus courses.

Important women and their contributions

Women are often underrepresented in STEM fields when compared to their male counterparts. In the modern era prior to the 1960s, computing was widely seen as "women's work," since it was associated with the operation of tabulating machines and other mechanical office work. The accuracy of this association varied from place to place. In America, Margaret Hamilton (software engineer), Margaret Hamilton recalled an environment dominated by men, while Elsie Shutt recalled surprise at seeing even half of the computer operators at Raytheon were men. Machine operators in Britain were mostly women into the early 1970s. As these perceptions changed and computing became a high-status career, the field became more dominated by men. Professor Janet Abbate, in her book ''Recoding Gender'', writes:

Yet women were a significant presence in the early decades of computing. They made up the majority of the first computer programmers during World War II; they held positions of responsibility and influence in the early computer industry; and they were employed in numbers that, while a small minority of the total, compared favorably with women's representation in many other areas of science and engineering. Some female programmers of the 1950s and 1960s would have scoffed at the notion that programming would ever be considered a masculine occupation, yet these women’s experiences and contributions were forgotten all too quickly.

Some notable examples of women in the history of computing are:
* Ada Lovelace: wrote the addendum to Babbage's Analytical Machine. Detailing, in poetic style, the first computer algorithm; a description of exactly how The Analytical Machine should have worked based on its design.
* Grace Hopper, Grace Murray Hopper: a pioneer of computing. She worked alongside Howard H. Aiken on the IBM's Mark I. Hopper also came up with the term "debugging."
* Hedy Lamarr: invented a "frequency-hopping spread spectrum, frequency hopping" technology that was used by the Navy during World War II to control torpedoes via radio signals. This same technology is also used today in creating Bluetooth and Wi-Fi signals.
* Betty Holberton, Frances Elizabeth "Betty" Holberton: invented "breakpoints" which are mini pauses put into lines of computer code to help programmers easily detect, troubleshoot, and solve problems.
*The women who originally programmed the ENIAC: Kathleen Antonelli, Kay McNulty, Jean Bartik, Betty Jennings, Marlyn Wescoff, Marlyn Meltzer, Frances Spence, Fran Bilas, Ruth Teitelbaum, Ruth Lichterman, and Betty Holberton (see above.)
* Jean E. Sammet: co-designed COBOL, a widely used programming language.
* Frances Allen: computer scientist and pioneer in the field of optimizing compilers, first woman to win the Turing Award.
* Karen Spärck Jones: responsible for "Tf–idf, inverse document frequency" - a concept that is most commonly used by search engines.
* Dana Angluin: made fundamental contributions to computational learning theory.
* Margaret Hamilton (scientist), Margaret Hamilton: the director of the Software Engineering Division at MIT, which developed on-board flight software for the Apollo space program, Apollo's Missions to Space.
* Barbara Liskov: developed the "Liskov substitution principle."
* Radia Perlman: invented the "Spanning Tree Protocol," a key network protocol used in Ethernet networks.
*Steve Shirley, Stephanie "Steve" Shirley: started F International, a highly successful freelance software company.
*Sophie Wilson: helped design ARM architecture, ARM processor architecture widely used in many products such as smartphones and video games.
*Ann Hardy: pioneered computer time-sharing systems.
*Lynn Conway: revolutionised microchip design and production by co-introducing Very Large Scale Integration#Structured design, structured VLSI design among other inventions.
*The Women in Bletchley Park, women at Bletchley Park: around 8,000 women who worked in numerous capacities with British cryptanalysis during World War II. Many came from the Women's Royal Naval Service (who were called "wrens") as well as the Women's Auxiliary Air Force ("WAAFs.") They were instrumental in cracking the Cryptanalysis of the Enigma, "Enigma" cipher and helping the Allies win the war.

See also

* Algorithm
* Moore's law
* FLOPS#Hardware costs, Timeline of computing hardware costs
* Charles Babbage Institute - research center for history of computing at University of Minnesota
* :Computing timelines, Computing timelines category
* History of computing in the Soviet Union
* History of computing in Poland
* History of computer hardware in Yugoslavia
* History of software
* IT History Society
* List of mathematicians
* List of pioneers in computer science
* Timeline of quantum computing
* Timeline of computing 2020–present

References

External links

The History of Computing
by J.A.N. Lee
"Things that Count: the rise and fall of calculators"The History of Computing ProjectSIG on Computers, Information and Society of the Society for the History of TechnologyThe Modern History of Computing
by Mark Brader

Bitsavers
an effort to capture, salvage, and archive historical computer software and manuals from minicomputers and mainframes of the 1950s, 60s, 70s, and 80s
* Developed at SRI International in 1961
Stephen White's excellent computer history site
(the above article is a modified version of his work, WP:History of computing/Permission, used with permission)
Soviet Digital Electronics Museum
- a big collection of Soviet calculators, computers, computer mice and other devices

by Jürgen Schmidhuber, from "The New AI: General & Sound & Relevant for Physics, In B. Goertzel and C. Pennachin, eds.: ''Artificial General Intelligence'', p. 175-198, 2006."
IEEE computer history timeline

Computer History
- a collection of articles by Bob Bemer

Computer Histories
- An introductory course on the history of computing

British history links

*

' Bulletin of the Computer Conservation Society (UK) 1990–2006
''The story of the Manchester Mark I''archive
, 50th Anniversary website at the University of Manchester
Richmond Arabian History of Computing Group
Linking the Gulf and Europe
History of Computing Collection
University of Manchester Library

{{History of technology

History of computing,
History of mathematics, Computing

bs:Historija računarstva
sr:Istorija računara